Nortel Meridian M1250 User Manual page 95

Convenience features
Monitoring a Trunk
1
2
3
4
Press an idle Loop key.
Press the Barge-In key.
Press the Barge-In key
again to enable
Attendant Monitor.
Dial the trunk access
code and route member
number, then press "#".
The Loop indicator is lit
The Barge-In lamp is lit.
The Barge-In lamp is in
the flashing state
indicating that the
Attendant Monitor option
is enabled.
One of the following
happens:
Attendant Monitor is
blocked when the trunk is
disabled .
Attendant Monitor is
blocked when the trunk is
idle.
• • • • 89 • • • •