Setting The Buzz Tone - Nortel Meridian M1250 User Manual

Introduction
Closing the Options menu
To close the Options menu, press # on either the first or second screen. The console remains in both
Position Busy and shift mode. Press SHIFT to return to unshift mode, and press
at your console again.
Now let's look at the screens you see when you select each of the options from the menu.
Setting the display-screen contrast
If you press 1 on the Options menu, you see this screen:
SET CONTRAST
1. + 2. –
There are eight levels of contrast between the characters you see on the screen and the background.
Press 1 to increase the contrast.
Press 2 to decrease the contrast.
Press # to return to the Options menu.

Setting the buzz tone

If you press 2 on the Options menu, you see this screen:
SETTING BUZZ TONE
1. ON 2. OFF
4. PITCH – 5. VOLUME +
Press 1 to hear a non-stop buzz for pitch- and volume-setting purposes. Then use 3 and 4 to raise and
lower the pitch of the buzz. Use 5 and 6 to raise and lower the volume of the buzz. When you have found
the pitch and volume you like best, press 2 to silence the buzzing.
Press # to return to the Options menu.
# <exit>
3. PITCH +
6. VOLUME –
# <exit>
to receive calls
• • • • 27 • • • •