Nortel Meridian M1250 User Manual page 21

Introduction
Conference 6/BLF
conf. 6/BLF
Shift
SHIFT
Note: The SHIFT key and console control keys used together enable you to access the Options menu,
to raise and lower the volume of the buzz tone, and to open the Diagnostics menu. (The Diagnostics
menu is used by the system installer or repair technician.)
Once in shift mode, pressing
opens the Options menu,
turns the buzz tone volume down,
turns the buzz tone volume up, and
selects the Diagnostic menu.
Hold
HOLD
In normal mode, it enables you to establish a conference call of up to six
parties, including yourself. A maximum of two trunks can be in the
conference at any one time. In shift mode, when the console is idle, this
key allows you to input information from the dial pad to the Busy Lamp
Field/Console Graphics Module.
This can also apply to 3-party conference.
Enables you to access trunk group keys either to busy them or to free
them. From regular mode, press SHIFT to change to shift mode. When
in shift mode, the SHIFT key indicator is on. Press SHIFT again to return
to regular mode.
Enables you to hold a call at your console.
• • • • 15 • • • •