Parking A Call - Nortel Meridian M1250 User Manual

Basic call processing

Parking a call

Call Park enables you to put a call on hold without occupying a lpk key on your console. You can, for
example, hold a call on a Call Park extension while paging a called party.
1
2a
2b
3
You wish to park a call,
perhaps because the
caller requests you to
page someone. Press
call park. [If you do not
have this key, dial the
special prefix (SPRE
code) plus ____.
If a Call Park extension is
available, it is assigned
to the call and displayed
automatically. Make a
note of the call and the
Call Park extension.
Press RLS. Page the
called party and deliver
the Call Park extension.
[An unanswered parked
call is returned to your
console after a set time.]
If no Call Park extension
is available, nothing is
displayed. Either take a
message or place the call
on Hold.
The call park indicator
goes on.
The D indicator flashes
slowly.
The call park and D
indicators go off; the call
is parked. The RLS
indicator goes on.
The D indicator flashes.
• • • • 47 • • • •