Recall From An Extension Using Link Or Att Recall - Nortel Meridian M1250 User Manual

Basic call processing

Recall from an extension using LINK or ATT RECALL

An extension user, while talking to someone on the phone, may recall you by pressing ATT RECALL, or
by pressing LINK once and dialing your number, depending on the type of extension. The recall ICI
goes on.
• • • • 50 • • • •
1
2
3
4
Note 1: This recall procedure describes a call that was originally extended through your console (S
and D indicators both active).
Note 2: If you wish to activate the Secrecy feature, which excludes the caller until connected to the
called party, press excl. src. before extending the call.
You receive a recall.
Press the lpk key beside
the quickly flashing D
indicator.
Press RLS dest. (if the
recaller has not already
released).
If the caller wishes to be
transferred, dial the new
extension.
Press RLS to end your
connection in the call.
The tone stops and the lpk
and D indicators go on
steadily; you, the party
originating the call, and
the original caller are
connected. The recall ICI
and S indicators go on.
The D indicator goes off;
the recaller is
disconnected.
The excl. src. indicator
goes on during dialing.
The D indicator flashes
slowly.
The RLS indicator goes
on; you are free to process
other calls.