Trunk-To-Trunk Call - Nortel Meridian M1250 User Manual

Basic call processing

Trunk-to-trunk call

A user, while outside the system, may call to request access to an outgoing trunk.
• • • • 56 • • • •
1
2
3
Note: If neither of the trunks involved in the call has answer supervision, the call is automatically
held on the lpk key. When both parties hang up, the S and D indicators remain on. Press the lpk key
and then RLS src. and RLS dest. and RLS again.
You answer an incoming
trunk call and the caller
requests access to an
outgoing trunk. Dial the
trunk access code, then
dial the requested
number.
When the called party
answers, you may talk
privately.
Press RLS to connect the
calling and called parties.
The excl. src. indicator
goes on during dialing.
You hear dial tone after
dialing the trunk access
code, and ringing after the
number. The D indicator
goes on steadily.
The D indicator remains
on. The excl. src. indicator
remains on.
The RLS indicator goes
on; you are free to process
calls on other loop keys
(see Note).