Charge; Entering An Account Number After Dialing A Call - Nortel Meridian M1250 User Manual

Charge

Entering an account number after dialing a call

Use this procedure to assign a charge account number to an outgoing call after you have dialed the call.
1
2
3
Note 1: Charge account numbers may consist of up to 23 digits. The system ignores extra digits.
Note 2: You can also enter charge account numbers before extending incoming calls to extensions.
Note 3:
During a conference call, you can:
— assign portions of the call to different accounts by entering charge numbers as you add
trunks to the conference
— assign the entire call to a single charge account number.
You have dialed an
outgoing call for an
extension at your
location. Press chg. [If
you do not have this key,
press conf. 6, dial SPRE
5, the charge account
code.]
Dial the charge account
number.
Press RLS to end your
connection in the call.
The D indicator flashes;
the called party is
automatically placed on
hold. The charge indicator
goes on.
The D indicator goes off;
the call is automatically
reestablished. The charge
indicator goes off.
The RLS indicator goes
on; you are free to process
other calls.
• • • • 137 • • • •