Nortel Meridian M1250 User Manual page 10

Introduction
When you have a call in progress, the display looks something like this:
The first line gives information about the source of the call. The source information may include the
number of the extension that placed the call, and the name of the person who is calling, or the trunk line
number for a call from outside the system. If you've chosen P.R.C., Taiwan or Korean as the language for
your display, this information can only be displayed in English. You may also see a code for the reason
you received the call (these abbreviations may vary):
The CW in the upper right indicates whether you have any calls waiting.
The second line gives information about the destination of a call and the console status.
The destination information can include the number dialed, and the name of the person whose extension
you dialed or the trunk and other access codes. If you've chosen P.R.C., Taiwan or Korean as the language
for your display, this information can only be displayed in English.
The console status can be:
• • • • 4 • • • •
When you have a call in progress...
DN CPND
DN CPND
— CFWD for a call that has been automatically routed to you from an extension that has been
programmed to forward all calls to you (Call Forward All Calls).
— CFNA for a call that has been routed to you from an extension that has been programmed to
forward calls to you when there is no answer (Call Forward No Answer).
— Hunt for a call that has been automatically routed to you from an extension that has been
programmed to forward calls to you when it is busy (Call Forward Busy), or that has been routed
to you through a hunt chain (Hunting).
— IDLE when the console is in idle mode.
— ACTIVE when the console is busy on a call.
— BUSY when the console is in Position Busy mode.
— NIGHT when the console is in Night Service mode.
CW<>
STATUS<>