Nortel Meridian M1250 User Manual page 88

Convenience features
• • • • 82 • • • •
3
4
Note: Barge-in cannot be used to verify the status of release link trunks (RLTs) used with Centralized
Attendant Service (CAS).
Dial the required trunk
access code and route
member number, then
press #.
Press RLS to end the
procedure.
You hear a fast busy
signal if the trunk is
disabled or not assigned.
You hear a fast busy
signal and the S indicator
flashes if the trunk is
blocked in the network.
Attempt Barge-In again in
a few minutes.
You are able to speak to
all parties and the S and D
indicators go on steadily if
the trunk is busy. Parties
hear a warning tone every
6 seconds.
You hear dial tone, the S
indicator goes on steadily,
and the barge in indicator
flashes if the trunk is idle.
The RLS indicator goes
on; you are free to
process calls.