Convenience features
Storing a Speed Call number
If your console is designated a Speed Call controller, you can store a number for Speed Call and use the
Speed Call codes. Also use this number-storing procedure to change a number stored against a Speed
Call code.
1
2
3
4
5
When all lpk indicators
are off, press S. call.
Dial the one-, two-, or
three-digit code to be
associated with the
phone number.
To see if a number is
already associated with
the dialed code, press
disp. src.
Dial the number to be
stored. Press * after
every trunk access code
to ensure a pause for dial
tone.
Press S. call again.
The S. call indicator
flashes.
The current speed-call list
entry (if any) is displayed.
The S. call indicator goes
off; the access code and
phone number you dialed
are stored together for
speed-calling.
• • • • 117 • • • •