Using Features - Nortel Meridian M1250 User Manual

Introduction
The (1–5) on the first line of the display tells you there are five items in the menu. Press * to see the
additional menu items. Pressing * repeatedly will step you through all the menu items.
CW: BUZZ TONE (1–5) [ SYMBOL ]
3. VOLUME (+) 4. VOLUME (–)
CW: BUZZ TONE (1–5) [ SYMBOL ]
5. CHANGE
Press 5 to turn the call waiting buzz tone on and off. A speaker symbol is displayed when the call waiting
buzz tone is on. When the call waiting buzz tone is on, you hear a buzz tone when you have a call waiting.
Press 1 to hear a continuous buzz tone while you set the volume. Then use 3 and 4 to raise and lower the
buzz tone volume. Once you've adjusted the volume, press 2 to turn off the continuous call waiting
buzz tone.
Press # to return to the previous display.

Using features

You can still use all the features described in the M1250 and M2250 Attendant Console User Guide. All
of the features work exactly the same except the following:
— Store an auto-dial number
— Store a speed-call number
— Store a Stored Number Redial number ahead of time
Before using these features you need to manually change from the idle display to the active call
display. When you have no calls in progress, you can alternate between the idle display and the active
call display by pressing the
to show the active call display; from the active call display, press the
idle display.
<#> EXIT
<*> MORE
<#> EXIT
<*> MORE
and keys. From the idle display, press the key
key to show the
• • • • 37 • • • •