Table of Contents
Advertisement
Introduction
Reading the display on 4 line display
If the source information is too long to fit on Line 2, an arrow appears in either the upper right or upper
left corner of the display.
If the destination information is too long to fit on Line 3, an arrow appears in either the lower right or
lower left corner of the display.
To see the rest of the information, use the console control keys to scroll through it. The console control
keys are the four middle keys in the horizontal row right under the display:
How to read the display
1.
Press
for Line 2.
Press
for Line 3.
2.
Press
to move towards the beginning of the number.
3.
Press
to move towards the end of the number.
Reading the display on 2 line display (M2250 only)
If the source or destination information is too long to fit on the line, an arrow appears on the right side of
the display. To see the rest of the information, use the console control keys. The console control keys are
the four middle keys in the horizontal row right under the display:
1.
Press
to select Line 1.
Press
to select Line 2.
2.
Press
to move towards the beginning of the display.
3.
Press
to move towards the end of the display.
• • • • 5 • • • •
Hide quick links:
Advertisement
Table of Contents
