Extending A Call To A Busy Remote Extension - Nortel Meridian M1250 User Manual

Centralized Attendant Service (CAS)

Extending a call to a busy remote extension

You can route one call to a busy extension at a remote location if camp-on is allowed at the busy end. If
the called extension does not become idle within a set time, you are automatically recalled by the
camped caller.
• • • • 134 • • • •
1
2
3a
3b
Note: If you dial the requested number at the remote location and hear only a busy signal (with no
beep), then a call is already camped onto that extension. If the caller wishes to wait, put the call on
silent hold (see next procedure). Otherwise, release the call.
The caller requests an
extension at the remote
location. Press .
C/H
Dial the requested
extension.
If the caller does not
wish to wait, press RLS
dest., then RLS to end
the call.
If the caller wishes to be
camped onto the busy
extension, press RLS. [If
recall occurs, either
re-extend the call (step
3b) or end it (step 3a).]
You hear dial tone from
the remote location; the
caller hears nothing. The
remote ICI, lpk, and S
indicators are on.
If the called extension is
busy, you hear a busy
signal followed by a beep;
you are reconnected to the
caller.
The RLS indicator goes
on; you are free to process
other calls.
The RLS indicator goes
on; you are free to process
other calls.