Calling An Attendant - Nortel Meridian M1250 User Manual

Supervisory features

Calling an attendant

As supervisor, you can call an attendant in your group, unless their console is in position-busy mode.
Note 1:
If you dial an incorrect attendant code, you hear a fast busy signal and the S indicator
remains off. Press RLS src.
Note 2: If the called console is busy, you hear a busy signal and the S indicator continues to flash
slowly. Press RLS.
Note 3: If the called console is in night-service mode, your call cannot be completed. You hear a
fast busy signal and the S indicator remains off. Press RLS dest.
• • • • 160 • • • •
1
Once in position-busy
mode, press an idle lpk
key.
2
Dial the attendant access
code.
3
Dial the appropriate
attendant codes.
4
The called attendant
answers. Press RLS
when you wish to end the
call.
The lpk indicator goes on.
You hear ringing. The S
indicator flashes slowly.
Ringing stops. The S
indicator goes on steadily.
The RLS indicator goes
on; you are free to process
other calls.