Table of Contents
Advertisement
Page 46 of 64
Attendant console operation
Attendant console features
Time and date
Table 5
Setting the time (M1250)
Step
Action
1
Press the Shift key.
2
Press F1 to enter the Options menu.
3
Select option 4 (set time).
4
To exit without changing the time, press
the octothorpe (#) key.
To enter a new time, use the dial pad
keys to overwrite the displayed settings.
5
To put the new time setting into effect,
press the asterisk (*) key.
6
To exit, press the octothorpe (#) key.
553-2201-117 Standard 10.00 January 2002
On the M2250 only, the time and date are automatically downloaded from the
Meridian 1 on power-up or console reset.
To set the time and date locally on the M1250 attendant consoles, follow the
procedures in Tables 5 and 6.
On the M2250 console, the time and date are downloaded by the switch
whenever it runs a lamp audit. Only the visual format can be changed.
Response
The Shift indicator goes on.
The current time appears in the 24-hour
format (hours: minutes: seconds).
When the new time is typed in, the
cursor moves from position to position
and then to the next entry field.
If more than six digits are entered, the
cursor returns to the hour field.
After pressing the asterisk (*) key, the
time entered is checked for correct
(24-hour) format. If it is legal, the
real-time clock changes to the setting
entered; if it is illegal, the current
real-time clock settings are redisplayed.
Hide quick links:
Advertisement
Table of Contents
