Feature Settings Panel - Nortel BCM50 2.0 Configuration Manual

Feature Settings panel

These settings affect all telephones. They determine whether the listed features are allowed, or
how they function.
Figure 23 System feature settings
Table 23 describes each field.
Table 23 Feature settings (Sheet 1 of 3)
Attribute
Business Name
Feature Settings
Background music
Page tone
*Conference Tone
Value Description
<maximum of 8 Enter the name to display on outgoing calls.
alphanumeric
Refer to "Programming Business name display (outgoing)" in the
characters>
Networking Configuration Guide (NN40020-603).
<check box> Select the check box to enable the caller to listen to music through
your telephone speaker after pressing FEATURE 86 on your
telephone. A music source must be connected to system. Refer to the
BCM50 2.0 Installation and Maintenance Guide (NN40020-302) for
information about installing an external music source.
Also refer to
Default: Cleared
<check box> Select the check box to sound a tone on the sets, before a page
begins. Also refer to
Note: This tone is not heard over external page ports.
Default: Selected
<check box> Select the check box to enable a conference tone that is heard by
participants at the beginning of the conference.
*Only available in certain profiles, UK, Germany, and Italy.
Chapter 9 Global telephony settings
"Selecting the music source" on page
"Paging" on page
294.
219.
Device Configuration Guide
75