Default Memory Button Programming For Telephones; Rules Of Default Button Assignment - Nortel BCM50 2.0 Configuration Manual

Chapter 21

Default memory button programming for telephones

Button programming allows you to program the buttons on a telephone with internal and external
autodialers, and with programmed feature keys. Assigned line, Hunt group designator, answer
DNs buttons, intercom buttons, and handsfree buttons cannot be changed through button
programming. These latter features appear in read-only format on the Button Programming table.
During startup, the installer chooses one of the available telephony template (PBX or DID). Each
profile has a default features set that assigns automatically to the programmable buttons on
telephones plugged into the system, unless you configure different settings in the DN record. The
default features are listed by telephone model in the following sections:
• "Rules of default button assignment" on page 153
• "7316E digital phone button defaults" on page 154
• "7316 digital phone button defaults" on page 156
• "7406 digital phone button defaults" on page 159
• "7208 digital phone button defaults" on page 157
• "7100 digital phone button defaults" on page 158
• "7000 digital phone button defaults" on page 158
• "IP telephone 2004 and 2050 Software Phone button defaults" on page 159
• "IP telephone 2002 button defaults" on page 161
• "IP telephone 2001 button defaults" on page 162
• "IP telephone 2007 button defaults" on page 163
• "IP audio conference phone 2033 button defaults" on page 167
• "IP Phone 1120E and IP Phone 1140E" on page 171
• "WLAN handset 2210/2211/2212 button defaults" on page 176
• "DMC Portables (413X/414X) (Europe only)" on page 179

Rules of default button assignment

• Line and intercom buttons assigned by default templates can be changed in programming.
Handsfree and Answer DN buttons are not assigned by default. When these features are
programmed, however, they are automatically assigned to specific buttons.
Device Configuration Guide
153