Configuring Analog Telephones And Devices - Nortel BCM50 2.0 Configuration Manual

Chapter 17

Configuring analog telephones and devices

Refer to the following information for attributes that are specific to analog telephones and devices.
Refer to "Configuring an analog telephone" on page
Task: Setting up each analog device attached to your system
Determine the programming for individual telephones and devices attached to analog station
modules or to digital station modules through an analog terminal adapter (ATA) module.
• "Configuring an analog telephone" on page 120
Analog telephones and devices have a limited feature set. They do not have programmable
buttons, access to remote voice mail systems, or user preferences. These telephones also do not
support Answer DNs.
As well, specific ATA settings are required. These settings depend on how the telephone is
connected to the system (ASM, ASM8+, or ATA).
120.
Device Configuration Guide
117