Global Telephony Settings - Nortel BCM50 2.0 Configuration Manual

Chapter 9

Global telephony settings

There are a number of settings that define telephony operation for the entire system. These have
been gathered on one panel, separated into sections.
The following paths indicate where to access global telephony settings in Element Manager and
through Telset Administration:
• Element Manager: Configuration > Telephony > Global Settings > Feature Settings
• Telset interface: **CONFIG > System Prgrming > Featr settings
Click one of the following links to connect with the type of information you want to view:
Panels and Details Panels
"Feature Settings" on page 74
"Feature Settings panel" on page 75
"Timers" on page 78
"Advanced Feature Settings" on page 81
"ONN Blocking (North American systems)" on
page 83
"Silent Monitor" on page 84
"Reset logs" on page 85
Click the navigation tree heading to access general information about user management.
Configure Features
"Programming Business name display
(outgoing)" in the Networking Configuration
Guide (NN40020-603)
"Selecting the music source" on page 294
"Call Park" on page 210
"Directed Pickup" on page 198
"Holding calls" on page 204
"Transfer (unanswered) calls" on page 206
"Paging" on page 219
"Receiver volume" on page 193
"Answer DNs" on page 200
"Camp-on" on page 209
"External call codes" on page 227
"Call Park" on page 210
"Callback" on page 211
"Configuring an analog telephone" on page 120
"Sharing calls by parking on SWCA buttons" on
page 211
"Blocking outgoing name display at the
telephone" in the Networking Configuration Guide
(NN40020-603)
"Capabilities tab" on page 52
"Monitoring external hunt group calls" on
page 109
"Capabilities and Preferences main tab" on
page 50 (Set log space)
"Call log" on page 214
Device Configuration Guide
73
(Supervisor sets)