Understanding The Leds; Front Panel Leds; Figure 6 Front Panel Of The Contivity 1010 - Nortel 1010 Series Installing

3
4
5

Understanding the LEDs

This section describes the LEDs on the front panel of the Contivity 1010/1050/
1100 and on the communication cards that you can install in the Contivity 1100.

Front panel LEDs

The front panel of the gateway has two LEDs that indicate the status of the
Contivity 1010/1050/1100: the Boot/Ready and the Alert LEDs
Contivity 1100 also has an audible alarm that corresponds to the Alert LED.

Figure 6 Front panel of the Contivity 1010

Plug the external power supply into the port labeled "DC Input" on the back
of the gateway (see Figure 5 on page
Press the power switch to the "on" position and wait for the gateway to boot.
Verify a successful installation by checking the LEDs on the front panel (see
"Front panel LEDs" on page
Note: For information about connecting the Contivity 1010/1050/1100
to the network, see the Read Me First, "Connecting for VPN Access."
Contivity 1010
Chapter 1 Hardware overview 21
19).
21).
Boot/Ready LED
10/100 Mb/s LEDs
LAN 0 LAN 1
Link/Activity LEDs
Installing the Contivity 1010/1050/1100
(Figure 6). The
Alert LED
Console
10675EA