Line/Set Restrictions Tab - Nortel BCM50 2.0 Configuration Manual

Table 21 provides a list of default restriction filters.
Table 21 Schedule filter defaults
Schedule
Normal
Schedule 1 (Night)
Schedule 2
(Evening)
Schedule 3 (Lunch) 13

Line/Set Restrictions tab

The Line/Set Restrictions settings allow you to assign a restriction filter to a specific line for
outgoing calls at a specific telephone. This type of filter replaces any line or set restriction filters
that can otherwise apply. Line/Set restrictions restrict the numbers the user can dial on a line, but
only from that telephone. The same line on another telephone can have different restrictions.
You can apply a different line restriction for normal service, and for each of the six schedules.
Figure 21 Line/Set Restrictions panel
Table 22 describes the fields on this panel.
Table 22 Line/Set Restrictions fields (Sheet 1 of 2)
Setting
Line
Restriction filter
(defaults)
02
11
12
Values Description
<XXX> A list of lines assigned to this telephone. Define a restriction filter for
each line under the schedules that you intend to use.
Restriction filters are defined under Call Security.
Chapter 6 DN records parameters
Schedule Restriction filter
(defaults)
Schedule 4 00
Schedule 5 00
Schedule 6 00
Device Configuration Guide
67