To Program User Speed Dials; User Speed Dials; Outgoing Call Restrictions - Nortel BCM50 2.0 Configuration Manual

The Desktop Assistant, and Desktop Assistant Pro are located under the User Applications
heading on the Element Manager web page. Desktop Assistant Pro requires a LAN CTE keycode
before it can be used. See the Keycode Installation Guide (NN40010-301) for more information on
keycodes.
IP telephones also have soft display labels. Refer to

User speed dials

Use this tab to assign telephone numbers to speed dial codes. These codes are available to all
telephones in the system. The number of available codes is determined under system feature
programming.
Programming references:
• "User Speed Dial tab" on page 63

To program user speed dials

1
Click Configuration > Telephony > Sets > Active Sets > Capabilities and Preferences tab.
2 Select the DN of the telephone to program.
3 Click the User Speed Dial tab in the bottom panel.
4
Use the Add button to enter the external number to dial and the facility to use when the
selected speed code is entered.
5 Enter a unique name for each speed dial. This name displays for incoming calls that match the
external number.
6 Program the speed dial code onto telephone buttons, and label the buttons.
Next step: "Outgoing call restrictions" on page 137

Outgoing call restrictions

Restriction filters determine what dialing strings are allowed or blocked from the user. You can
specify restriction filters specific to the telephone, as well as filters that are specific to a line
assigned to the telephone.
Programming reference:
• "Restrictions main tab" on page 65
• restriction filters
• line restrictions
• CoS passwords
Chapter 18 Configuring telephones: Digital telephones
"IP features list" on page 143.
Device Configuration Guide
137