Configuring System Speed Dial Numbers; System Speed Dial Panel - Nortel BCM50 2.0 Configuration Manual

Chapter 10

Configuring system speed dial numbers

System speed dial codes are assigned to external numbers. You can use then the two- or three-digit
code to dial the number, or assign the code to a memory button, instead of dialing the entire string.
These assignments are the same for all users in the system.
The following paths indicate where to access system speed dial programming in Element Manager
and through Telset Administration:
• Element Manager: Configuration > Telephony > Global Settings > System Speed Dial
• Telset interface: **CONFIG > Sys speed dial
Panels/Subpanels
"System Speed Dial panel" on page 87
Click the navigation tree heading to access general information about Hospitality services.

System Speed Dial panel

This panel allows you to determine the number of speed dial codes on the system, and what each
code dials.
Configuring features and tasks
"Using alpha tagging for name display (incoming)" in the
Networking Configuration Guide (NN40020-603)
"Button Programming tab" on page 60
"Programming memory buttons" on page 226
"Speed dialing" on page 225
Device Configuration Guide
87