Accessories/spare parts
Accessories for the S7-1500 automation system/ET 200MP distributed I/O system
Table B- 1
General accessories
Designation
Mounting rail
•
Mounting rail, 160 mm (with drill holes)
•
Mounting rail, 245 mm (with drill holes)
•
Mounting rail, 482 mm (with drill holes)
•
Mounting rail, 530 mm (with drill holes)
•
Mounting rail, 830 mm (with drill holes)
•
Mounting rail, 2000 mm (without drill holes) for cutting to
length
Standard rail adapter, 10 adapters, 10 hexagon socket screws and
10 washers
Active backplane bus
•
For one interface module and 12 I/O modules (ST 1+12)
•
For one interface module and 8 I/O modules (ST 1+8)
•
For one interface module and 4 I/O modules (ST 1+4)
PE connection element for mounting rail, 2000 mm (spare part),
20 units
Front connector (incl. four potential bridges, cable tie, and individual labeling strip) for 35 mm modules
•
Screw-type terminals, 40-pin
Front connector (incl. four potential bridges, cable tie, and individual labeling strip) for 35 mm modules
•
Push-in terminal (40-pin)
Front connector (incl. cable tie and individual labeling strip) for 25 mm modules
•
Push-in terminal (40-pin)
4-pole connection plug for supply voltage (spare part), 10 units
DIN A4 labeling sheet (10 x for labeling the 35 mm I/O modules)
•
Pre-perforated, AI gray
DIN A4 labeling sheet (10 x for labeling the 25 mm I/O modules)
•
Pre-perforated, AI gray
U connector (spare part), 5 units
I/O shielding set for 35 mm modules (consists of: power supply
element, shielding bracket, and shield clamp), (spare part), 5
units
Automation system
System Manual, 01/2023, A5E03461182-AK
Article number
6ES7590-1AB60-0AA0
6ES7590-1AC40-0AA0
6ES7590-1AE80-0AA0
6ES7590-1AF30-0AA0
6ES7590-1AJ30-0AA0
6ES7590-1BC00-0AA0
6ES7590-6AA00-0AA0
6ES7590-0BL00-0AA0
6ES7590-0BH00-0AA0
6ES7590-0BD00-0AA0
6ES7590-5AA00-0AA0
6ES7592-1AM00-0XB0
6ES7592-1BM00-0XB0
6ES7592-1BM00-0XA0
6ES7193-4JB00-0AA0
6ES7592-2AX00-0AA0
6ES7592-1AX00-0AA0
6ES7590-0AA00-0AA0
6ES7590-5CA00-0AA0
B
363