Siemens SIMATIC S7-1500/ET 200MP System Manual page 184

3. Put the strain relief (cable tie) around the cable harness, and pull the strain relief for the
cable harness tight (Figure 2).
Figure 7-16
4. Insert the shield clamp from below into the shielding bracket in order to connect the cable
shielding (Figure 3).
Figure 7-17
Automation system
System Manual, 01/2023, A5E03461182-AK
Wiring front connectors for I/O modules with shield connection element (2)
Wiring front connectors for I/O modules with shield connection element (3)
7.10 Front connector for the I/O modules
Wiring
183