Spare Parts/Accessories; Terminal Module Tm31 - Siemens SIMOTION SCOUT D410 Manual

Spare parts/Accessories

7.1

Terminal module TM31

Features of the TM31
The TM31 terminal module allows you to expand the number of available digital
inputs/outputs as well as the number of analog inputs/outputs within a drive system. The
TM31 is connected via DRIVE-CLiQ. It has 2 DRIVE-CLiQ interfaces for this.
The TM31 contains the following terminals:
Table 7- 1
Interface
Digital inputs
Bidirectional inputs/outputs
Relay outputs with changeover contact
Analog inputs
Analog outputs
Temperature sensor input (KTY84-130 or PTC)
The 50 mm clearances above and below the components must be observed.
Additional references
Additional information on TM31 is available in the following documents:
●
●
D410
Manual, 05/2009
Interface overview of the TM31
CAUTION
SIMOTION D410
Commissioning Manual
Supplementary SINAMICS System Components for SIMOTION
Quantity
8
4
2
2
2
1
Manual
7
89