Siemens SIMATIC S7-1500/ET 200MP System Manual page 294

Regarding ②: Names of the menus
The following table shows the available menus of the display.
Table 13- 2 Names of the menus
Main menu items
Automation system
System Manual, 01/2023, A5E03461182-AK
Meaning Description
Overview The "Overview" menu contains information about:
• The properties of the CPU
• The properties of the inserted SIMATIC Memory Card
• Whether a know-how protection or a linking of the serial number exists.
The following information is displayed for F-CPUs:
• The status of the safety mode
• The collective signature
• The date of the last changes
Diagnostics The "Diagnostics" menu includes:
• The display of diagnostic messages.
• Read/write access to force and watch tables.
• Display of cycle time.
• Display of CPU memory utilization.
• Display of interrupts.
Settings In the "Settings" menu you:
• Assign the IP addresses and the PROFINET device name of the CPU.
• Set the network properties of each CPU interface.
• Set the date, time, time zones, operating modes (RUN/STOP) and protec-
tion levels.
• Disable/enable display with display password
• Perform a CPU memory reset.
• Perform a reset to factory settings.
• Format the SIMATIC Memory Card.
• Delete the user program.
• Back up/restore the CPU configuration to/from the SIMATIC Memory
Card.
• View the status of the firmware update.
• Convert the SIMATIC Memory Card to a program card
Modules The "Modules" menu contains information about the central and distributed
modules that are used in your configuration.
Peripherally deployed modules are connected to the CPU via PROFINET
and/or PROFIBUS.
You can set the IP addresses for the CPU or a CP/CM here.
Fail-safe parameters are displayed for F-modules.
Display In the "Display" menu you can configure settings related to the display, such
as language setting, brightness and energy-saving mode. The energy-saving
mode dims the display. The standby mode selectors the display off.
CPU display
293