Siemens SIMATIC S7-1500/ET 200MP System Manual page 197

Configuring
8.1 Configuring the CPU
Properties of the CPUs
The properties of the CPUs have special significance for system behavior. For a CPU you can
make the following settings in STEP 7, for example:
• Startup characteristics
• Parameter assignment of the interfaces, for example, IP address, subnet mask
• Web server, e.g., activation, user administration, and languages
• OPC UA server
• Global Security Certificate Manager
• Cycle times, e.g., maximum cycle time
• Properties for the operation of the display
• System and clock memory
• Protection level for access protection with assigned password parameter
• Time and day settings (daylight saving/standard). For additional information, refer to the
following FAQ on the Internet
(https://support.industry.siemens.com/cs/ww/de/view/43566349/en).
The properties that can be set and the corresponding value ranges are specified by STEP 7.
Fields that cannot be edited are grayed out.
Reference
Information about the individual settings can be found in the STEP 7 online help and in the
manuals of the relevant CPUs.
196
Automation system
System Manual, 01/2023, A5E03461182-AK