Siemens SIMATIC S7-1500/ET 200MP System Manual page 260

Inserting the SIMATIC memory card
To insert a SIMATIC memory card, follow these steps:
1. Open the front cover of the CPU.
2. Ensure that the CPU is either switched off, or in the STOP mode.
3. Insert the SIMATIC memory card, as depicted on the CPU, into the slot for the SIMATIC
memory card.
①
Figure 12-1
4. Insert the SIMATIC memory card with light pressure into the CPU, until the SIMATIC memory
card latches.
Automation system
System Manual, 01/2023, A5E03461182-AK
12.3 Procedure for commissioning the S7-1500 automation system
Standard, F-CPUs / compact CPUs from article number 6ES751x-xxx02-0AB0/6ES751x-
1CK01-0AB0: The slot for the SIMATIC memory card is located on the bottom of the CPU.
Slot for the SIMATIC memory card
Commissioning
259