Siemens SIMATIC S7-1500/ET 200MP System Manual page 298

Uploading image to the display via STEP 7
In the STEP 7 device view, you download an image from your file system to the CPU display
with the "Display > User-defined logo" function.
Figure 13-4
To display the uploaded image in the correct aspect ratio, use images with the following
dimensions depending on the CPU.
Table 13- 4 Dimensions
CPU
CPU 1511(F)-1 PN
CPU 1511C-1 PN
CPU 1511T(F)-1 PN
CPU 1512C-1 PN
CPU 1513(F)-1 PN
CPU 1515(F)-2 PN
CPU 1515T(F)-2 PN
CPU 1516(F)-3 PN/DP
CPU 1516T(F)-3 PN/DP
CPU 1517(F)-3 PN/DP
CPU 1517T(F)-3 PN/DP
CPU 1518(F)-4 PN/DP
CPU 1518T(F)-4 PN/DP
CPU 1518(F)-4 PN/DP MFP
If the uploaded image exceeds the specified dimensions, the display shows only part of the
image. The "Adapt logo" option in STEP 7 allows you to reduce the image to the specified
dimensions. However, note that the original aspect ratio of the image is not retained in such
cases.
Displaying image on the display
To display the uploaded image on the display of the CPU, press the ESC key in the main
screen of the display. When you upload an image and are in the main screen, the display
automatically shows the image after 60 seconds. To hide the image again, press any key on
the display.
Automation system
System Manual, 01/2023, A5E03461182-AK
Uploading image to CPU
Dimensions
128 x 120 pixels
128 x 120 pixels
128 x 120 pixels
240 x 260 pixels
240 x 260 pixels
240 x 260 pixels
240 x 260 pixels
Supported formats
Bitmap, JPEG, GIF, PNG
Bitmap, JPEG, GIF, PNG
Bitmap, JPEG, GIF, PNG
Bitmap, JPEG, GIF, PNG
Bitmap, JPEG, GIF, PNG
Bitmap, JPEG, GIF, PNG
Bitmap, JPEG, GIF, PNG
CPU display
297