Ce Electromagnetic Compatibility (Emc) Conformity; The Manual - Siemens sitrans LR200 Instruction Manual

CE Electromagnetic Compatibility (EMC) Conformity

This equipment has been tested and found to comply with the following EMC Standards:
EMC Standard
CISPR 11:2004/EN
55011:1998+A1:1999&A2:2002, CLASS B
EN 61326:1997+A1:1998+A2:2001+A3:2003
(IEC 61326:2002)
EN61000-4-2:2001
EN61000-4-3:2002
EN61000-4-4:2004
EN61000-4-5:2001
EN61000-4-6:2004
EN61000-4-8:2001

The Manual

Notes:
• Please follow the installation and operating procedures for a quick, trouble-free
installation and to ensure the maximum accuracy and reliability of your SITRANS LR200.
• This manual applies to the SITRANS LR200 (PROFIBUS PA) only.
This manual will help you set up your SITRANS LR200 for optimum performance. We
always welcome suggestions and comments about manual content, design, and
accessibility. Please direct your comments to techpubs.smpi@siemens.com.
For other Siemens Milltronics level measurement manuals, go to:
www.siemens.com/level and look under Level Measurement.
Page 2 SITRANS LR200 (PROFIBUS PA) – INSTRUCTION MANUAL
Title
Limits and methods of measurements of radio
disturbance characteristics of industrial, scientific, and
medical (ISM) radio-frequency equipment.
Electrical Equipment for Measurement, Control and
Laboratory Use – Electromagnetic Compatibility.
Electromagnetic Compatibility (EMC) Part 4-2:Testing
and measurement techniques – Electrostatic discharge
immunity test.
Electromagnetic Compatibility (EMC) Part 4-3: Testing
and measurement techniques – Radiated, radio-
frequency, electromagnetic field immunity test.
Electromagnetic Compatibility (EMC) Part 4-4: Testing
and measurement techniques – Electrical fast
transient/burst immunity test.
Electromagnetic Compatibility (EMC) Part 4-5: Testing
and measurement techniques – Surge immunity test.
Electromagnetic Compatibility (EMC) Part 4-6: Testing
and measurement techniques – Immunity to conducted
disturbances, induced by radio-frequency fields.
Electromagnetic Compatibility (EMC) Part 4-8:
Testing and measurement techniques – Power
frequency magnetic field immunity test.
7ML19985JR01