Lithium Batteries; Key Functions In Measurement Mode - Siemens SITRANS LR560 Compact Operating Instructions

Commissioning
5.5 Commissioning via handheld programmer
5.5.2

Lithium batteries

Lithium batteries are primary power sources with high energy content designed to provide the
highest possible degree of safety.
Potential hazard
Lithium batteries may present a potential hazard if they are abused electrically or
mechanically. Observe the following precautions when handling and using lithium batteries:
● Do not short-circuit, recharge or connect with false polarity.
● Do not expose to temperatures beyond the specified temperature range.
● Do not incinerate.
● Do not crush, puncture or open cells or disassemble.
● Do not weld or solder to the battery's body.
● Do not expose contents to water.
5.5.3

Key functions in measurement mode

Key functions in measurement mode
Key
36
WARNING
Function
Updates the loop cur‐
rent
Updates internal en‐
closure temperature
reading
Updates echo confi‐
dence value
Updates distance
measurement
Mode opens PRO‐
GRAM mode
Home toggles local
display
Result
New value is shown in secondary region of local display.
New value is shown in secondary region of local display.
Opens the menu level last displayed in this power cycle, unless
power has been cycled since exiting PROGRAM mode or more than
10 minutes have elapsed since PROGRAM mode was used. Then
top level menu will be displayed.
Local display toggles between % or linear units
Compact Operating Instructions, 06/2018, A5E39693895-AA
LR560