Load Parameter Set - Siemens SIPROCESS GA700 Operating Manual

6.23.3

Load parameter set

Procedure
1. Main menu > "3. Maintenance and diagnostics" > "10. Save/load parameter set" >
"2. Load parameter set"
Depending on the user level, you can load "user data" or "factory data".
Use this function to load a parameter assignment saved in the device. You have the
option to restore the original settings with this function. Loading always relates to all
existing modules. The loading of the parameter set of only one analyzer module is not
possible.
2. Select the parameter set: "Loading" parameter box.
– Authorize access with Standard PIN, if necessary.
– Load factory data or user data:
– Depending on the selection, different dates are displayed of the last saved parameter
3. Start save process: "Load parameter set" parameter box.
Follow the instructions in the displayed window.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
When you select the "Factory data" setting, you prepare for loading the factory-
assigned basic parameters.
When you select the "User data" setting, you prepare for loading the most recently
saved user-defined parameter assignment.
set.
6.24 [3.11] Maintenance & Diagnostics > Test
Functions
235