Main View (Selection Mode); Navigational View - Siemens SIPROCESS GA700 Operating Manual

4.3.3.2

Main view (selection mode)

Figure 4-13
If you press <ENTER> in one of the two measured-value displays, the display switches from
read mode to selection mode. The first displayed component is highlighted with a black
background.
Use the <▲> and <▼> keys to select between displayed components. Use the <▶> or
<ENTER> key to change to the menus of the selected component. You can find information
about views in the read mode under: → Main view (read mode) (Page 63),
4.3.3.3

Navigational view

Figure 4-14 Example: Main menu
The navigational display comprises all levels of the menu structure in which you open
device-, module-, or component-specific menus, and select their menu entries. The currently
selected menu entry is always highlighted with a black background.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Example: Main view with two components in selection mode
Operation
4.3 Display
67