[2.20.11] Physical Measuring Range - Siemens SIPROCESS GA700 Operating Manual

– Unit not "ppm" or "User-defined"
6.14.6

[2.20.11] Physical measuring range

Service menu. You only have read access.
This menu contains all information on the physical measuring range of the component. In
particular, it includes information on the high and low range limits as well as the smallest
span. The displays are the same as those for OXYMAT 7 and ULTRAMAT 7. The display
range is expanded for CALOMAT 7:
Table 6- 50
Displayed pa-
rameters
High measuring
range limit
Permitted high
limit violation
Smallest span,
high
Low range limit
Permitted low limit
violation
Smallest span, low
Smallest span
Maximum measuring range span = upper measuring range limit - lower measuring range limit
1)
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
The current measured value is output in the unit "ppm" ("Measured value in ppm"
display field) and in the user-defined unit ("Meas. value in act. unit").
When you set this unit, the conversion factor for the unit "ppm" is displayed.
The current offset (actual unit) and the measured value in the unit "ppm" and in the
currently set unit are also displayed.
Display scope menu [2.20.11]
OXYMAT
7
Yes
No
No
Yes
No
No
Yes
ULTRAMAT CALOMAT
7 7
Yes Yes
No Yes
No Yes
Yes Yes
No Yes
No Yes
Yes No
Functions
6.14 [2.20] Settings > Service
Notes
Maximum permissible measured
value (full-scale)
Maximum permitted violation of
the upper measuring range limit.
This value is specified as a per-
centage of the maximum measur-
ing range span .
1)
Smallest permitted measured
value span for the upper measur-
ing range limit in which the accu-
racy is specified.
Minimum permissible measured
value (characteristic initial value)
maximum permitted violation of
the lower measuring range limit.
This value is specified as a per-
centage of the maximum measur-
ing range span .
1)
Smallest permitted measured
value span for the lower measur-
ing range limit in which the accu-
racy is specified.
Minimum permissible span in
which the accuracy is specified
201