Identifying Option Modules; [3.10] Maintenance & Diagnostics > Save/Load Parameter Set; Overview - Siemens SIPROCESS GA700 Operating Manual

6.22.6

Identifying option modules

Procedure
1. The access paths depend on the hardware configuration: The menus include all
identification data specified in the factory for the following features:
– Option module 1
– Option module 2
2. Write down the identification data, if necessary. The following equipment-specific data is
displayed:
1)
2)
6.23 [3.10] Maintenance & Diagnostics > Save/load parameter set
6.23.1

Overview

In this menu you can access the parameters with which you save and load parameters sets.
Parameter sets contain the parameter assignment of the device. Two types can be
distinguished:
● Factory data: This parameter set is the factory default and is used to restore the original
parameter assignment. For this reason, factory data can only be loaded.
● User data: This parameter set maps a current, application-specific parameter assignment.
You can save and reload user data at any time.
The navigation lines of the device are structured as follows:
Table 6- 61
Structure of the navigation bars
1.
2.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Display field
1)
Module type
Item number
Serial number
Product version
Firmware version
Only visible with option module 2.
DI/DO: Option module 1.1, AI/DI: Option module 2.2
Example of menu structure (all equipment options)
Save parameter set
Load parameter set
6.23 [3.10] Maintenance & Diagnostics > Save/load parameter set
Remark
DI/DO or AI/DI
Manufacturer identification number.
-
Technical status of hardware
Version of the firmware
Functions
2)
Edit ►
233