5] Security; Assigning / Changing Personal Identification Numbers (Pin); Automatic Log-Off - Siemens SIPROCESS GA700 Operating Manual

6.28

[5] Security

6.28.1

Assigning / changing personal identification numbers (PIN)

Procedure
1. Main menu > "5. Security" > "1. Access management"
The parameter display includes parameter boxes that you use to specify the PINs of the
permission levels.
2. Assign/change passwords:
The table below summarizes the assignment/change options:
1)
– Select the required permission level.
– Open the parameter box.
– Enter new four-digit password in the "PIN" editing window. A PIN must have 4 digits.
6.28.2

Automatic log-off

Procedure
Note
Factory setting
The "Automatic log-off" function is activated in the factory. The default time is 5 minutes. If
required, disable the function or set a different value for the time.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Permission level
Parameter boxes that require a higher permission level are locked.
Authorize access by input of the corresponding PIN.
Use the following PIN for the corresponding permission levels during initial
commissioning: Standard: 1111, Expert: 2222.
The editing window is closed after the input.
Assignment/change options
Standard →
Expert →
Service → Standard, Expert, and Service
Functions
6.28 [5] Security
1)
Standard only
Standard and Expert
251