Identifying A Device - Siemens SIPROCESS GA700 Operating Manual

Functions
6.22 [3.09] Maintenance & Diagnostics > Identification
6.22.2

Identifying a device

Procedure
1. Main menu > "3. Maintenance & diagnostics" > "09. Identification" > "01 Device (PU)".
The menu includes all identification data specified for the device in the factory. You have
the option to assign a device name and enter the commissioning date.
2. Assign device name: "TAG" parameter field.
The device name is used as a means of identifying the device in a network.
– Authorize access with Standard PIN, if necessary.
– You can use up to 31 characters for the designation.
3. Enter commissioning date: "Commissioning date" parameter field.
4. Write down the identification data, if necessary. The following device-specific data is
displayed:
1)
5. Complete identification: → Identifying analyzer modules (Page 231).
See also
Overview (Page 229)
230
Display field
Product name
Article number Part 1
1)
Article number Part 2
1)
Article number suffixes
1)
Serial number
Product version
Firmware version
Complete article number, e.g.: 7MB3000-0AA00-0AA0-ZABC
Remark
SIPROCESS GA700
Display of first part of device article number,
e.g. "7MB3000".
Display of second part of device article number,
e.g. "0AA00-0AA0".
Display of article number suffix, e.g. "ZABC".
The article number suffix identifies options for
your device.
Display serial number of the device.
Display hardware version of the device.
Display installed firmware version.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05