Functions
6.19 [3.05] Maintenance & Diagnostics > Diagnostics values
6.19.4.3
[3] Digital inputs
You only have read access.
In this menu you can get information on the function assigned for each input as well as the
status of the input (High/Low). The following information is displayed for each digital input:
Navigation lines in the menu [3.05.4.3.0.n]
Current status
DI active for
Function
No display of function group
1)
The assignment of the inputs to the device modules can be identified by the numbering:
● DI01 ...DI08 ↔ Processing unit
● DI09 ... DI16 ↔ Option module 1
● DI17 ... DI20 ↔ Option module 2
For additional information go to → [2.09.3] Digital inputs (Page 143).
6.19.4.4
[4] Digital outputs
You only have read access.
In this menu you can get information about the digital outputs available with the current
hardware configuration. The following information is displayed for each digital output:
Navigation lines in the menu [3.05.4.4.0.n]
Current status
Function
No display of function group
1)
The assignment of the inputs to the device modules can be identified by the numbering:
● DO01 ... 8 ↔ Processing unit
● DO09 ... 20 ↔ Option module 1
● DO21 ... 23 ↔ Analyzer module 1
● DO24 ... 26 ↔ Analyzer module 2
For additional information go to → [2.09.5] Digital outputs (Page 152).
222
Function assignment
Live/De-energized
Function assignment
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Low/ High
Low/ High
1)
1)