Functions
6.19 [3.05] Maintenance & Diagnostics > Diagnostics values
OXYMAT 7: Status information for the heating control
Table 6- 56
Parameter
Temp. measuring head
Temp. sample chamber
Temp. heating element
Temp. analyzer module
Manip. val. meas. head
Sample chamber ma-
nipulated value
CALOMAT 7: Status information for the heating control
Table 6- 57
Parameter
Measurement block
temp.
Membrane temp.
Temp. analyzer module
Sensor temp.
Block gauge heater
manipulated value
6.19.2
[3.05.2] Predictive self-diagnostics ULTRAMAT 7
Overview
This menu is available only for ULTRAMAT 7 analyzer modules:
Component > "3. Maintenance & Diagnostics" > "05. Diagnostics values" > "2. Predictive
self-diagnostics"
This menu contains status information/current values to evaluate the quality of the signal.
You can also assess whether the device may require service.
You only have read access. The displayed alarm or warning limits can be set with the
Service PIN.
218
OXYMAT 7: [3.05.1.3] Heating controller
Description
Current temperature measured values
Show manipulated value of the measuring head heater
Show manipulated value of the sample chamber heater
OXYMAT 7: [3.05.1.3] Heating controller
Description
Current temperature measured values
Current block gauge heater manipulated value.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05