[2.13] Setting > Process Tag Switchover; Setting The Process Tag Switchover; Assigning Process Tags - Siemens SIPROCESS GA700 Operating Manual

6.12 [2.13] Setting > Process tag switchover
6.12.1

Setting the process tag switchover

Procedure
1. Component > Main menu > "2. Settings" > "13. Process tag switchover"
The menu includes 13 navigation lines that you use to assign the process tags for
automatic process tag switchover. The menu entries have the following structure:
1)
2)
3)
4)
2. Assign process tags 1 to 12: Assigning process tags (Page 185).
3. Enable/disable all assigned process tags: Enabling/disabling all process tags (Page 186).
6.12.2

Assigning process tags

Requirements
For automatic process tag switchover, one or more digital outputs must be assigned to a
process tag. Check the corresponding assignments under Setting digital outputs (Page 155).
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Structure of the navigation lines
1 Total
1)
2 ... 13 > Designation of the pro-
2)
cess tag
Enable/disable all process tags for process tag switchover
Designation of active process tag
Digital output to which this process tag is connected. If the process tag is connected with
several digital outputs, it is identified with "", .."".
Remaining time of the currently active process tag or set measuring time for inactive process
tags.
6.12 [2.13] Setting > Process tag switchover
DO n/ ", .." Time
3) 4)
Functions
Activation status
(on/off)
Edit
Activation status
(on/off)
Edit
185