Toyota AVENSIS 1999 Supplement Manual page 338

AC–28
– COMPRESSOR AND MAGNETIC CLUTCH (1CD–FTV)
AIR CONDITIONING
INSTALLATION
1. INSTALL COMPRESSOR
(a) Install the compressor with the 3 bolts.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
(b) Connect the connector.
2. CONNECT DISCHARGE AND SUCTION HOSES
Connect the both hoses with the 2 bolts.
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
CAUTION:
Hoses should be connected immediately after the caps
have removed.
HINT:
Lubricate 2 new O–rings with compressor oil and install the
hoses.
I12469
3. INSTALL RESERVOIR TANK
(a) Connect the reservoir tank with the 2 bolts.
(b) Connect the lower hose.
(c) Install the upper hose.
4. REFILL ENGINE COOLANT
5. INSTALL AND CHECK DRIVE BELT
(See page AC–3)
6. INSTALL ENGINE UNDER COVER RH
7. CONNECT NEGATIVE (–) TERMINAL CABLE TO BAT-
I12494
TERY
8. EVACUATE AIR IN REFRIGERATION SYSTEM AND
CHARGE WITH REFRIGERANT
Specified amount: 450 ± 50 g (15.87 ± 1.76 oz.)
9. INSPECT FOR LEAKAGE OF REFRIGERANT
Using a gas leak detector, check the tightening torque at the
joints.
10. INSPECT A/C OPERATION
AC2AC–01