MX–34
A
B
A
MANUAL TRANSAXLE (E251)
3.
Using a feeler gauge, measure the clearance between the hub
sleeve and shift fork.
If the clearance exceeds the maximum, replace the shift fork or
hub sleeve.
WM0066
4.
(a)
(b)
Q06203
(c)
Q06191
–
OUTPUT SHAFT
MEASURE NO.1 SHIFT FORK AND HUB SLEEVE
CLEARANCE
Maximum clearance: 1.0 mm (0.039 in.)
INSPECT OUTPUT SHAFT
Check the output shaft for wear or damage.
Using a micrometer, measure the outer diameter of the
output shaft journal surface.
Minimum outer diameter:
Part A: 37.526 mm (1.4774 in.)
Part B: 34.512 mm (1.3588 in.)
Using a dial indicator, check the shaft runout.
Maximum runout: 0.06 mm (0.0024 in.)