Toyota AVENSIS 1999 Supplement Manual page 104

DI–12
DTC
CIRCUIT DESCRIPTION
The curtain shield airbag squib (RH) circuit consists of the airbag sensor assembly and curtain shield airbag
assembly (RH).
It causes the curtain shield airbag assembly (RH) to activate when the curtain shield airbag assembly (RH)
activation conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC 82 is recorded when a B+ short is detected in the curtain shield airbag squib (RH) circuit.
DTC No.
S Short circuit in curtain shield airbag assembly (RH) wire
harness (to B+)
82
S Curtain shield airbag squib (RH) malfunction
S Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–8.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–285 of Pub. No. RM599E)
2 Check curtain shield airbag squib (RH) circuit.
Curtain
Shield
Airbag
Squib (RH)
ON
(+)
(–)
ICR+
H11641
AB0119
H11650
OK
DIAGNOSTICS
82 Short in Curtain Shield Airbag Squib (RH)
Circuit (to B+)
DTC Detecting Condition
Airbag
Sensor
Assembly
Airbag Sensor
Assembly
ICR–
H11659
– SUPPLEMENTAL RESTRAINT SYSTEM
S Curtain shield airbag assembly (RH)
S Airbag sensor assembly
S Wire harness
CHECK:
(a) Turn ignition switch to ON.
(b) For the connector (on the airbag sensor assembly side)
between the curtain shield airbag assembly (RH) and the
airbag sensor assembly, measure the voltage between
ICR+, ICR– and body ground.
OK:
Voltage: 1 V or less
NG Repair or replace harness or connector be-
tween curtain shield airbag assembly (RH) and
airbag sensor assembly.
Trouble Area
DI698–01