Toyota AVENSIS 1999 Supplement Manual page 102

DI–10
3 Check airbag sensor assembly.
→ ←
Curtain
Shield
Airbag
Squib (RH)
ICR– ICR+
Check Connector
Tc
E1
H01023
H02144
AB0118 AB0119
R13006 H11642
OK
DIAGNOSTICS
Airbag
Sensor
Assembly
ACC ON
or
DTC 81
H11657
– SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect ICR+ and ICR– of the con-
nector (on the curtain shield airbag assembly side) be-
tween the curtain shield airbag assembly (RH) and the
airbag sensor assembly.
(c) Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn ignition switch to ACC or ON and wait at least for 20
seconds.
(b) Clear DTC stored in memory.
(See step 5 on page DI–153 of Pub. No. RM599E)
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d) Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(e) Check DTC.
(See page DI–152 of Pub. No. RM599E)
OK:
DTC 81 is not output.
HINT:
Codes other than code 81 may be output at this time, but they
are not relevant to this check.
NG Replace airbag sensor assembly.