Toyota AVENSIS 1999 Supplement Manual page 115

3 Check airbag sensor assembly.
Curtain
Shield
Airbag
Squib (LH)
→ ←
ICR+ ICR–
Check Connector
Tc
E1
H01023
H02144
AB0118 AB0119
R13006
H11646
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
(c)
ACC ON
CHECK:
(a)
or
(b)
DTC 85
(c)
(d)
(e)
H11668
OK:
HINT:
Codes other than code 85 may be output at this time, but they
are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect ICR– and ICR+ of the con-
nector (on the curtain shield airbag assembly side) be-
tween the curtain shield airbag assembly (LH) and airbag
sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See step 5 on page DI–153 of Pub. No. RM599E)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–152 of Pub. No. RM599E)
DTC 85 is not output.
NG Replace airbag sensor assembly.
DI–23