Toyota AVENSIS 1999 Supplement Manual page 225

SUPPLEMENTAL RESTRAINT SYSTEM
– SRS AIRBAG
8. CONNECTION OF SIDE AND CURTAIN SHIELD AIR-
BAG SENSOR CONNECTOR
(a) Align the male connector (of the side of sensor) and fe-
male connector in the same direction as shown in the il-
lustration and fit in them without rubbing.
(b) As they are fitted in, the outer slides rearward. Press it un-
til the outer returns to its original position again.
If fitting stops half way, connectors will separate.
(c) Make sure to insert until they are locked. After fitting in,
pull them slightly to check that they are locked. (When
locked, make sure that the outer returns to its original
position and sound at the time of fitting in can be heard.)
HINT:
Do not fit in while holding the outer.
S
When fitting in, the outer slides. Do not touch it.
S
Outer
RS–7
Outer
H01583