Toyota AVENSIS 1999 Supplement Manual page 253

SUPPLEMENTAL RESTRAINT SYSTEM
H03674
H03425
– SIDE AND CURTAIN SHIELD AIRBAG SENSOR
ASSEMBLY
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and various
electrical devices unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by
static electricity.)
1. REMOVE FRONT AND REAR SCUFF PLATE
2. REMOVE CENTER PILLAR LOWER GARNISH
3. REMOVE FRONT SEAT OUTER BELT RETRACTOR
(See Pub. No. RM599E on page BO–151)
(a) Disconnect the pretensioner connector.
(b) Remove the 2 bolts and retractor.
4. REMOVE SIDE AND CURTAIN SHIELD AIRBAG SEN-
SOR ASSEMBLY
(a) Disconnect the connector.
NOTICE:
Remove the connector with the sensor assembly installed.
(b) Remove the 2 bolts, nut and side and curtain shield airbag
sensor assembly.
RS–35
RS0IY–01