Toyota AVENSIS 1999 Supplement Manual page 205

PS Gear
Closed
SST
Lock Position
PS Gear
Open
SST
Lock Position
PS Gear
Open
SST
–
STEERING
(f) With the engine idling, close the valve of the SST and ob-
serve the reading on the SST.
Oil
reservoir
Minimum fluid pressure:
4A–FE and 7A–FE engines
2C–T, 2C–TE and 1CD–FTV engines
PS Vane
NOTICE:
Pump
S
Do not keep the valve closed for more than 10 se-
Z15498
conds.
S
Do not let the fluid temperature become too high.
(g) With the engine idling, open the valve fully.
(h) Measure the fluid pressure at engine speeds of 1,000 rpm
Oil
reservoir
and 3,000 rpm.
Difference fluid pressure:
490 kPa (5 kgf/cm
NOTICE:
PS Vane Do not turn the steering wheel.
Pump
Z15499
(i) With the engine idling and valve fully opened, turn the
steering wheel to full lock.
Oil
reservoir
Minimum fluid pressure:
4A–FE and 7A–FE engines
2C–T, 2C–TE and 1CD–FTV engines
PS Vane
NOTICE:
Pump
S
Do not maintain lock position for more than 10 se-
Z15500
conds.
S
Do not let the fluid temperature become too high.
(j) Disconnect the SST.
(k) Connect the pressure feed tube to PS vane pump
[See Pub. No. RM599E on page SR–22 (4A–FE and 7A–
FE engines), SR–25 (3S–FE engine), and see page
SR–16 (2C–T, 2C–TE and 1CD–FTV engine)].
(l) Bleed the power steering system(See Pub. No. RM599E
on page SR–5).
POWER STEERING FLUID
3S–FE engine
2
, 71 psi) or less
3S–FE engine
SR–5
2
8,238 kPa (84 kgf/cm , 1,195 psi)
2
9,022 kPa (92 kgf/cm , 1,309 psi)
2
8,826 kPa (90 kgf/cm , 1,280 psi)
2
8,238 kPa (84 kgf/cm , 1,195 psi)
2
9,022 kPa (92 kgf/cm , 1,309 psi)
2
8,826 kPa (90 kgf/cm , 1,280 psi)