BO–20
: 3 Clips
: 3 Clips
: 3 Clips
–
INSTRUMENT PANEL
BODY
8.
INSTALL NO.1 UNDER COVER
Install the No.1 under cover.
H03662
9.
INSTALL NO.1 REGISTER
Install the No.1 register.
10.
INSTALL COMBINATION METER
H03661
11.
INSTALL CLUSTER FINISH PANEL
(a)
Install the cluster finish panel, then connect the connec-
tor.
(b)
Install the 2 screws.
12.
INSTALL THESE PARTS:
(See Pub. No. RM 599E, page SR–13)
(a)
Install the steering column.
(b)
Install the combination switch.
(c)
Install the column cover.
H03660
13.
INSTALL LOWER FINISH PANEL
(a)
Install the lower finish panel with the 2 screws.
(b)
Install the hood lock control lever.
14.
INSTALL STEERING WHEEL
(See Pub. No. RM 599E, page SR–13)
15.
INSTALL THESE PARTS:
(a)
Install the front seats.
Torque: 37 N·m (375 kgf·cm, 27 ft·lbf)
(b)
Install the center pillar lower covers.
H03659
(c)
Install the rear door scuff plates.
(d)
Install the rear door opening trims.
(e)
Install the cowl side trims.
(f)
Install the front door scuff plates.